Safe Soft Washing
Walls are cleaned at low pressure with detergent rather than force, so paint, siding and mortar are never stripped, dented or gouged.
Our Services
Jacksonville House Pressure Washing
Professional house pressure washing for homes across Jacksonville and Duval County. We use a low-pressure soft wash system that strips mold, mildew and algae off siding, brick and stucco — without forcing water behind your walls.
Residential Pressure Washing, Done the Safe Way
Concrete is one of the few exterior surfaces that benefits from true high-pressure cleaning — but only when it's done correctly. We use commercial rotary surface cleaners to deliver a completely even, stripe-free finish across driveways, walkways, patios, and other hard surfaces.
Unlike wand-based cleaning that leaves visible lines, our method ensures a uniform result from edge to edge.
If a Jacksonville pressure washing company quotes a house wash and talks about PSI rather than dwell time, they are about to pressure wash your siding. Ask which method they use before you book.
Why It Matters
Why Jacksonville Driveway Cleaning Matters
Driveways in Jacksonville are constantly exposed to heat, humidity, rain, vehicle traffic, and organic growth. Over time, this leads to staining, discoloration, and slippery surfaces.
Professional cleaning is not just cosmetic — it improves safety, protects the surface, and restores the original appearance of your concrete or pavers.
Eco-Friendly Cleaning
Biodegradable solutions that break down quickly and are safe around the St. Johns River watershed, your landscaping, pets and children.
Licensed & Insured
Fully licensed and insured for residential work across Duval County, with certificates available on request before we start.
Surface Protection
We identify the material first — vinyl, stucco, Hardie or painted wood — and match pressure and chemistry to it rather than treating every wall the same.
Long-Lasting Results
Killing the spores instead of rinsing the surface means Jacksonville homes typically stay visibly clean two to three times longer.
Free On-Site Estimates
We walk the property, assess the growth and give you a fixed written price before any work begins. No obligation, no pressure.
Local Conditions
What Jacksonville's Climate Does to Your Home's Exterior
Jacksonville averages over 50 inches of rain a year and spends most of the summer above 70% humidity. That combination — constant moisture, warmth and shade — is close to ideal for the organisms that discolour exterior walls. It is why homes here need attention roughly twice as often as those in drier states.
The pattern is predictable once you know what to look for. North-facing walls and anything shaded by live oaks go first. Homes closer to the river and the Intracoastal in Riverside, San Marco and Atlantic Beach pick up salt and mildew faster. Properties backing onto woodland in Mandarin and Orange Park collect more pollen and organic debris.
Green Algae on Siding
The most common complaint we get across Jacksonville. Green film on vinyl and stucco is algae feeding on moisture and airborne organic matter — it spreads fastest on shaded, north-facing walls.
Black Mold & Mildew
Dark speckling around soffits, gutter lines and under eaves. Left alone it holds moisture against the wall, which is what eventually causes trim rot and paint failure.
Spring Pollen Staining
Jacksonville's oak and pine pollen coats everything each spring. Once rain sets it into a film on siding it will not simply wash off, and it feeds later algae growth.
Salt Air Residue
Homes in Atlantic Beach, Neptune Beach and Ponte Vedra collect airborne salt that dulls finishes and accelerates corrosion on fixtures and fasteners.
Oak Tannin Staining
Jacksonville's live oaks drop leaves and catkins that leave rust-coloured tannin streaks down walls and around gutter outlets. These need targeted treatment, not just rinsing.
Lovebug Residue
Twice a year lovebugs coat south-facing walls. The residue is acidic and will etch paint and finishes if it is left through a Florida summer.
Method Matters
Soft Washing vs High-Pressure Washing
Both have a place in residential pressure washing. The skill is knowing which surface gets which — and getting that wrong is how homes get damaged.
Soft Washing
- Runs at roughly garden-hose pressure — around 100 PSI
- Detergent kills mold, mildew and algae at the root
- Safe on vinyl, stucco, Hardie board, brick and painted wood
- No risk of water being driven behind siding or trim
- Results last two to three times longer than rinsing alone
- The method siding manufacturers actually recommend
High-Pressure Washing
- Runs at 2,000–4,000 PSI — enough to cut soft timber
- Strips paint and leaves permanent lines in wood and stucco
- Forces water behind lap siding, feeding rot and interior mold
- Removes the surface growth but leaves living spores behind
- Can void siding warranties and damage window seals
- Correct for concrete and pavers — not for the house itself
When Not to Pressure Wash at All
- Asphalt shingle roofs — high pressure removes the protective granules and voids most manufacturer warranties.
- Older painted timber built before 1978, where blasting can disturb lead-based paint.
- Stucco and EIFS with existing hairline cracks — pressure drives water straight into the wall cavity.
- Damaged, loose or lifting siding, which should be repaired before any cleaning takes place.
- Window and door seals showing failure, where forced water will find its way inside.
- Composite decking with an aggressive tip, which scars the surface permanently.
What You Get
What You Get
No upsells on the day and no surprises on the invoice — this is the standard scope of work.
- Even, stripe-free cleaning using commercial surface cleaners
- Targeted pre-treatment for oil, rust, and tire marks
- Safe removal of algae and slippery organic buildup
- Clean edges, borders, and hard-to-reach corners
- Full rinse with debris cleared from the surface
- Optional paver re-sanding and sealing for long-term protection
Surfaces We Clean
Poured Concrete
The most common driveway surface. Handles full-pressure surface cleaning for a uniform finish.
Pavers
Deep cleaned and optionally re-sanded to stabilize joints and reduce weed growth.
Brick
Cleaned using controlled pressure to protect mortar joints and surface integrity.
Stamped & Decorative Concrete
Cleaned at reduced pressure to preserve color, texture, and sealant.
How It Works
How It Works
From the first walk of the property to the last pass, here is what actually happens and why each step is there.
01
Estimate & Surface Assessment
We inspect the property, identify all surface types, and determine the correct cleaning method for each area before quoting.
02
Surface Protection
Plants, outlets, and nearby fixtures are protected. Landscaping is pre-rinsed to reduce chemical absorption and prevent damage.
03
Pre-Treatment
Oil, rust, and organic stains are treated with targeted solutions to break down buildup before pressure cleaning begins.
04
Surface Cleaning
A commercial rotary surface cleaner is used to ensure an even, streak-free finish across all flatwork.
05
Final Rinse & Detail Work
Edges, corners, and transitions are detailed with controlled rinsing for a complete finish.
06
Final Walkthrough
We review the results with you and ensure everything meets expectations before leaving.
Pricing
Jacksonville Driveway Cleaning Pricing
All pricing is confirmed after a free on-site estimate. The ranges below help you understand typical costs in Jacksonville.
Single Story
Typical one-storey Jacksonville home up to roughly 2,000 sq ft.
$199per wash
Final price confirmed after a free on-site estimate.
- Full exterior soft wash
- Landscaping protection
- Windows and sills rinsed
- Spot treatment for stains
- Final walkthrough
Most Popular
Two Story
Two-storey home up to roughly 3,500 sq ft, including upper gables.
$349per wash
Final price confirmed after a free on-site estimate.
- Everything in Single Story
- Extended-reach soft wash
- Soffit and fascia cleaning
- Gutter faces brightened
- Tannin stain treatment
House & Roof
House wash combined with a full roof soft wash — our most popular bundle.
$549bundle
Final price confirmed after a free on-site estimate.
- Everything in Two Story
- Complete roof soft wash
- Gutter clearing included
- Single-visit scheduling
- Priority booking
Expert Advice
Expert Tips from Our Jacksonville Crew
Practical advice from a decade of washing homes in this climate — most of it will save you money whether or not you hire us.
Wash Before Pollen Season, Not After
Booking in late winter means walls go into Jacksonville's spring pollen surge clean. Pollen bonds far more stubbornly to a surface that already has a film of algae on it.
Watch the North Side
Your north-facing walls will always green up first because they dry slowest. If that side is turning, the rest of the house is usually four to six months behind it.
Trim Back Vegetation
Shrubs touching the wall trap moisture against it and keep it permanently damp. Twelve to eighteen inches of clearance dramatically slows regrowth between washes.
Fix Gutters Before Washing
Overflowing gutters stain walls faster than anything else. Clearing them first means the clean actually lasts, instead of streaking again at the next storm.
Do Not Wait for It to Look Bad
Once growth is visible from the kerb it has been established for months and has begun holding moisture against the wall. Annual washing costs a fraction of repainting.
Bundle the Roof and Driveway
Most Jacksonville homes need all three within the same year. Doing them in one visit avoids repeat call-out charges and gets you a noticeably better overall price.
FAQ
House Pressure Washing Questions
The questions Jacksonville homeowners ask us most about this service, answered straight.
Still Have Questions?
Call us or send a message — we will give you a straight answer, whether or not it leads to a booking.
Call NowMost driveway cleaning jobs in Jacksonville range from $149 to $379 depending on size, surface type, and level of staining. A free on-site estimate is always provided before work begins.
Not when done correctly. We use controlled pressure and commercial surface cleaners designed specifically for concrete and pavers, which prevents etching, striping, or surface damage.
Sealing is recommended for pavers and decorative concrete. It helps prevent weed growth, reduces staining, and makes future cleanings easier and more effective.
Most Jacksonville house washes run between $199 and $549. A single-storey home up to about 2,000 sq ft typically costs $199, a two-storey home around $349, and bundling a roof soft wash brings the total to roughly $549. Size, height, and how much organic growth has built up are the main factors. Every quote is fixed in writing after a free on-site estimate.
Once a year suits most Jacksonville homes. Our humidity and rainfall let mold and algae re-establish quickly, and north-facing walls or anything shaded by live oaks may need attention every eight to ten months. Homes near the water in Atlantic Beach, San Marco or Ponte Vedra, and those under heavy tree cover in Mandarin or Orange Park, often do better on a twice-yearly schedule.
Pressure washing cleans with force, typically 2,000 to 4,000 PSI, and is right for concrete, pavers and brick hardscapes. Soft washing cleans with chemistry at roughly 100 PSI and is right for anything on the house itself — siding, stucco, painted wood and roofs. Using high pressure on walls strips paint and drives water behind the siding, which is the single most common cause of pressure washing damage we are called out to fix.
No. We pre-wet all landscaping before applying any detergent, cover sensitive plants, and rinse thoroughly afterwards. The solutions we use are biodegradable and break down quickly, which matters in a city where runoff reaches the St. Johns River. In over a decade of Jacksonville house washing we have not lost a customer's shrub.
No. We only need access to an outdoor water spigot and clear access around the house. Most customers leave instructions and go about their day. We text when we arrive, photograph before and after, and send the results when we finish.
Most single-storey Jacksonville homes take two to three hours. Two-storey homes typically take three to five. Adding a roof soft wash extends the visit by roughly two hours. We schedule generously so the crew is never rushing the dwell time, which is the part that actually does the cleaning.
We cover all of Jacksonville and Duval County, including Riverside, Avondale, San Marco, Mandarin, Arlington, Southside, Springfield and Murray Hill, plus Atlantic Beach, Neptune Beach, Jacksonville Beach, Ponte Vedra and Orange Park. If you are just outside those areas it is worth asking — we often can.
Service Area
House Washing & Soft Washing Across Jacksonville
We cover all of Jacksonville and Duval County, from the historic districts to the beaches. If your neighbourhood is not listed, it is still worth asking.
- Jacksonville
- Riverside
- San Marco
- Mandarin
- Orange Park
- Atlantic Beach
- Neptune Beach
- Jacksonville Beach
- Ponte Vedra
- Southside
- Arlington
- Westside
- Northside
- Avondale
- Murray Hill
- Springfield
Browse All Service Areas
Not sure if we reach you? Get in touch and we will tell you straight away.
Related Services
Often Booked Together
Many customers combine driveway cleaning with other exterior services to save time and reduce overall cost.
Roof Cleaning
Soft wash treatment for the black streaking on shingle, tile and metal roofs. No pressure on the roof surface at any point.
See Pricing →
Gutter Cleaning & Brightening
Two different jobs: clearing debris from inside the gutter, and removing the black striping from the outside.
See Pricing →
Deck & Fence Cleaning
Pressure-treated wood, composite decking, vinyl and wood fencing, each at its own pressure.
See Pricing →
Get a Free Estimate
Tell us your address and what needs cleaning. We'll inspect the surfaces, explain the process, and provide a clear written quote before any work begins.
Call Now